Información Técnica

Artículos técnicos | Patentes | InfoAVEP

09/01/2023	Block Copolymers in 3D/4D Printing: Advances and Applications as Biomaterials
09/01/2023	Catalytic Pyrolysis of Polystyrene Waste in Hydrocarbon Medium
09/01/2023	Binary Graft of Poly(acrylic acid) and Poly(vinyl pyrrolidone) onto PDMS Films for Load and Release of Ciprofloxacin
09/01/2023	Phase Morphology, Mechanical, and Thermal Properties of Calcium Carbonate-Reinforced Poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) Bioplastics
09/01/2023	Multiwalled Carbon Nanotubes Embedded in a Polymeric Matrix As a New Material for Thin Film Microextraction (TFME) in Organic Pollutant Monitoring
09/01/2023	A Novel High Temperature Fuel Cell Proton Exchange Membrane with Nanoscale Phase Separation Structure Based on Crosslinked Polybenzimidazole with Poly(vinylbenzyl chloride)
09/01/2023	Wearable and Washable MnO2−Zn Battery Packaged by Vacuum Sealing
09/01/2023	Reduction of Ultrafiltration Membrane Fouling by the Pretreatment Removal of Emerging Pollutants: A Review
09/01/2023	Design Strategies for Forward Osmosis Membrane Substrates with Low Structural Parameters—A Review
09/01/2023	Recovery of Extracellular Polymeric Substances from Excess Sludge Using High-Flux Electrospun Nanofiber Membranes
09/01/2023	Wettability Studies of Capillary PTFE Membranes Applied for Membrane Distillation
09/01/2023	Scheffe’s Simplex Optimization of Flexural Strength of Quarry Dust and Sawdust Ash Pervious Concrete for Sustainable Pavement Construction
09/01/2023	Influence of Pozzolans and Hemp Shives on the Properties of Non-Autoclaved Foamed Concrete
09/01/2023	Kinetics Study of Polypropylene Pyrolysis by Non-Isothermal Thermogravimetric Analysis
09/01/2023	Ensemble Machine-Learning-Based Prediction Models for the Compressive Strength of Recycled Powder Mortar